# These TNC cmds will be executed each time you start aprsd.
# Modify the MYCALL and BTEXT lines with your data.
# Add/delete any other commands your TNC needs for configuration.
# The last command "K" puts the TNC in communication mode and must be present.
# These sample commands are for a Kantronics KPC-3
# A ctrl-C is sent to the TNC from the server just before these commands are issued.
# Note: The TNCs user interface must have already been set for 9600 baud.
#
#
INTFACE TERMINAL
ECHO OFF
BText San Diego, CA DIGI and IGATE w9if@arrl.net BEACON
BEACON EVERY 59

# Locaiton beacons difference based on path
BLT 1 EVERY 00:09:59
BLT 2 EVERY 00:39:58
BLT 3 EVERY 03:00:04 START 00:00:05
BLT 4 EVERY 03:00:05 START 01:30:05

CD SOFTWARE
CMSG DISC
CTEXT Unmanned digi/igate, disconnecting now!
CHECK 30
DIGI OFF
#FILTER ON
HEADERLN OFF
HID OFF

# Location
LT 1 !3253.83NI11711.71W&PHG7330/w9if@arrl.net SAN DIEGO, CA LT1
LT 2 !3253.83NI11711.71W&PHG7330/w9if@arrl.net SAN DIEGO, CA LT2
LT 3 !3253.83NI11711.71W&PHG7330/w9if@arrl.net SAN DIEGO, CA LT3
LT 4 !3253.83NI11711.71W&PHG7330/w9if@arrl.net SAN DIEGO, CA LT4
LTP 1 APRS
LTP 2 APRS VIA WIDE
LTP 3 APRS VIA WIDE2-2
LTP 4 APRS VIA TRACE3-3

MONITOR ON
MCOM OFF
MRPT ON
MSTAMP OFF
MYCALL W9IF-7
MYALIAS %
#NEWMODE OFF
PACLEN 0
PASSALL OFF
SCREENL 0
XMITOK ON

UNPROTO APRS
UIDIGI ON RELAY,CA
UIDWAIT OFF
UIFLOOD %
UITRACE %
K
#
# end of file